YAESU G-450DC ANTENNA ROTATOR

ART.2581
€335.00

The Yaesu G-450DC is our new entry-level rotator and is ideal for small lightweight HF tribanders, or for VHF and UHF antenna systems.

done In stock

Electrical data

  • Power supply voltage: 220 V / 50-60 Hz
  • Power supply current consumption: 0.5 A
  • Operating temperature (Rotator): -20℃ to +40℃
  • Operating temperature (Controller): 0℃ to +40℃
  • 360° Rotation time (Non loaded): 63 seconds at 50 Hz, 51 seconds at 60 Hz
  • Rotation range: 450°
  • Rotation torque: 600 kgf-cm
  • Braking torque: 3,000 kgf-cm
  • Maximum vertical load: Coninuous: 100 kg or less / Momentary: 300 kg
  • Braking type: Mechanical stoppers
  • Antenna K coefficient: 100 or less
  • Maximum continuous duty: 3 minutes
  • Type of rotor: Azimuthal
  • Less

Mechanical data

  • Wind loading area: Pole type: 0.5 m² x 0.5 m or less / Tower type: 1.0 m² or less
  • Mast diameter: Ø 32 to 63 mm
  • Diamater (Rotator): Ø 186 mm
  • Height (Rotator): 263 mm
  • Weight (Rotator): ±3500 gram
  • Length (Controller): 190 mm
  • Height (Controller): 125 mm
  • Width (Controller): 150 mm
  • Weight (Controller): ±2700 gram
  • Less

Inside the box

  • Controller unit: 1 pcs
  • Rotor unit: 1 pcs
  • U bolts: 2 pcs
  • 7-pin round plug (with rubber boot): 1 pcs
  • 6-pin rectangular plug: 1 pcs
  • M8 x 16 mm hex bolts: 4 pcs
  • Split washers: 8 pcs
  • Flat washers: 4 pcs
  • M8 nuts: 4 pcs
  • Installation manual: English
ART.2581